姓名:马昱春
职称:教授
邮箱:myc@tsinghua.edu.cn
教育背景
工学学士 (计算机科学与技术), 西安交通大学, 中国, 1999;
工学博士 (计算机科学与技术), 清华大学, 中国, 2004;
研究领域
集成电路设计自动化,算法设计与分析
研究概况
我主要从事集成电路设计自动化领域的基础算法研究工作,在布图规划算法、三维芯片规划设计、面向微处理器性能优化的布图规划设计、以及面向功耗和时延优化的规划设计等方面开展研究,曾于2005年在美国加州大学洛杉矶分校访问一年,从事三维芯片布图规划和微处理器系统布图规划研究,并参与了3D-MEVA系统的开发。近年来,我在布图规划研究方面取得一系列的科研成果,共发表了40余篇论文(SCI检索9篇、EI检索34篇),包括IEEE Trans. on CAD、ACM Trans. on DAES、ACM Journal on ETC等国际一流学术期刊论文以及10余篇发表在设计自动化方向国际一流学术会议上(DAC、ISPD、ICCAD等)的论文。我还获得了International Conference on ASIC 2001的最佳论文奖以及ASPDAC 2010的最佳论文候选。
与此同时,我还从事二维和三维芯片的物理设计优化方法研究,将时序设计、物理位置约束以及功耗优化问题集成在自动优化过程中。面向三维芯片布图中多目标、多约束的复杂情况,我们提出了基于力模型的解析式求解方法。此外,我们提出的增量式设计流程以及相关算法,从流程和算法角度帮助复杂设计实现快速的收敛过程。
我从事的研究以芯片设计的性能和可靠性为优化目标,横跨计算机算法与电子设计两个学科,具有一定的交叉性。我与国内外大学的多位教授有深入的合作,目的是利用计算机领域的算法,结合电子设计的特点,实现对设计的优化和算法的加速。
研究课题
国家自然科学基金重点课题: 面向时序设计的布图规划算法研究 (2007-2009).
奖励与荣誉
ASICON 2007: 最佳论文奖 (2007).
学术成果
[1] Yuchun Ma, Xin Li, Yu Wang and Xianlong Hong. Thermal-Aware Incremental Floorplanning for 3D ICs based on MILP Formulation. IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, vol. E92-A, no.12, pp. 2979-2989, 2009.
[2] Yuchun Ma, Yongxiang Liu, Eren Kursun, Glenn Reinman, and Jason Cong. Investigating the Effects of Fine-Grain Three-Dimensional Integration on Microarchitecture Design. ACM JOURNAL ON EMERGING TECHNOLOGIES IN COMPUTING SYSTEMS, Vol.4 (4), No. 17,2008.
[3] Yuchun Ma, Xianlong Hong, Sheqin Dong, C.K. Cheng, and Jun Gu. General floorplans with L/T-shaped blocks using corner block list. JOURNAL OF COMPUTER SCIENCE AND TECHNOLOGY, Vol. 21, No.6, pp. 922-926, 2006.
[4] Pingqiang Zhou, Yuchun Ma, Zhouyuan Li, Dick Robert P. , Li Shang, Hai Zhou, Xianlong Hong and Qiang Zhou. 3D-STAF: scalable temperature and leakage aware floorplanning for three-dimensional integrated circuits. Proc. IEEE/ACM International Conference on Computer-Aided Design (ICCAD 2007), California, U.S., pp.590-597, 2007.
[5] Yuchun Ma, Xianlong Hong, Sheqin Dong, Song Chen, C.K. Cheng and Jun Gu. Buffer planning as an integral part of floorplanning with consideration of routing congestion. IEEE TRANSACTIONS ON COMPUTER-AIDED DESIGN OF INTEGRATED CIRCUITS AND SYSTEMS, Vol.24, No.4, pp.609-621, 2005.
[6] Xianlong Hong, Yuchun Ma, Sheqin Dong, Yici Cai, Chung-Kuan Cheng and Jun Gu. Corner Block List Representation and its Application with Boundary Constraints. Science in China Series F-Information Sciences Vol.47, No.1, pp.1-19, 2004.
[7] Yuchun Ma, Xianlong Hong, Sheqin Dong,Yici Cai, Chung-Kuan Cheng and Jun Gu. Stairway Compaction using Corner Block List and its Applications with Rectilinear Blocks. ACM Transactions on Design Automation of Electronic Systems (TODAES), Vol.9. No.2, pp.199-211, 2004.
[8] Yuchun Ma, Xianlong Hong, Sheqin Dong,Song Chen,Yici Cai, Chung-Kuan Cheng and Jun Gu. Dynamic Global Buffer Planning Optimization Based on Detail Block Locating and Congestion Analysis, Prof. 40th Design Automation Conference(DAC2003), pp.806-811, USA, 2003.
[9] Yuchun Ma, Xianlong Hong, Sheqin Dong, Song Chen, Yici Cai, Chung-Kuan Cheng, Jun Gu. An Integrated Floorplanning with an Efficient Buffer Planning Algorithm. Prof. International Symposium on Physical Design 2003(ISPD2003), pp.136-142, USA, 2003.
[10] Yuchun Ma, Xianlong Hong, Sheqin Dong, Yici Cai, Chung-Kuan Cheng, and Jun Gu. Floorplanning with Abutment Constraints Based on Corner Block List. Integration, the VLSI Journal, Vol.31, pp.65-77, Netherlands, 2001.
[11] Yuchun Ma, Xianlong Hong, Sheqin Dong, Yici Cai, Chung-Kuan Cheng and Jun Gu. Floorplanning with Boundary Constraints Using the Corner Block List(CBL) Representation. IEICE Transactions on Fundamental of Electronics, Communications and Computer Science, Vol. E84A, No.11, pp.2697-2704, 2001.
[12] Yuchun Ma, Xianlong Hong, Sheqin Dong, Yici Cai, Chung-Kuan Cheng and Jun Gu. Floorplanning with abutment constraints and L-shaped/T-shaped blocks based on Corner Block List. Proc. 38th Design Automation Conference (DAC2001), pp.770-775, Las Vegas, USA, 2001.